INMATEH - CUPRINS – Vol. 44, Nr. 3 / 2014     /     INMATEH - CONTENTS – Vol. 44, No. 3 / 2014

No.

TITLUL / AUTORII

TITLE / AUTHORS

Pag.

INFLUENCE OF TILLAGE TOOLS CUTTING EDGE WEAR OVER TECHNICAL

AND ECONOMICAL MARKERS /

Influenţa uzării muchiei tăietoare asupra indicatorilor tehnico-economici

Assoc.Prof.Ph.D.Eng. Fechete Tutunaru L. V.1), Ph.D. Stud. Eng. Nagy E. M.2), Ph.D. Stud. Eng. Coţa C-tin.2)

1) Technical University of Cluj-Napoca / Romania, 2) INMA Bucharest / Romania

5

DEFINITION OF BASIC PARAMETERS OF SMALL-SIZED FLEXIBLE HARROW /

ВИЗНАЧЕННЯ ОСНОВНИХ ПАРАМЕТРІВ МАЛАГАБАРИТНОЇ ГНУЧКОЇ БОРОНИ

PhD. Eng. Usenko M.

Lutsk National Technical University / Ukraine

13

EXPERIMENTAL DETERMINATION OF FLOW CONCENTRATION

FOR PNEUMATIC CONVEYING SYSTEMS OF AIR-SEEDERS /

Determination expérimentale de la concentration dE transport

dans les systèmes de distribution des semoir pneumatiques

Ph.D. Stud. Yatskul A.I.1,2), Associate Prof. Ph.D. Lemière JP.1).

1) Kuhn SA, Saverne / France

2) National Institute of Higher Education in Agronomy,

Food and Environmental Sciences  (AgroSup Dijon), Dijon cedex / France

19

ANALYSIS OF WORK PROCESS OF SEEDING FURROWS EMBEDDING BY A CONICAL ROLLER /

АНАЛІЗ РОБОЧОГО ПРОЦЕСУ ЗАГОРТАННЯ ПОСІВНИХ БОРОЗЕН КОНІЧНИМ КОТКОМ

Ph.D.Eng. Shvedik M.

Lutsk National Technical University / Ukraine

27

DYNAMICS OF OVERSOWING MACHINE MSPD 2,5 RELATED TO WORKING

AND CONSTRUCTIVE PARAMETERS /

DINAMICA MAŞINII DE SUPRAÎNSĂMÂNŢAT MSPD 2,5 ÎN CORELAŢIE

CU PARAMETRII de LUCRU ŞI CONSTRUCTIVI

Ph.D. Eng. Ene T.A., Ph.D. Eng. Mocanu V.

Research-Development Institute for Grassland Brasov / Romania

33

INNOVATIVE TECHNOLOGY FOR IRRIGATION AND CLIMATE CONTROL

IN VEGETABLE GREENHOUSES /

TEHNOLOGIE INOVATIVĂ DE IRIGAŢII ŞI CONTROLUL CLIMEI ÎN SERELE LEGUMICOLE

Ph.D. Eng. Marin E., Prof.Ph.D. Eng. Pirnă I., Ph.D. Eng. Manea D., Ph.D. Stud. Matache M.

INMA Bucharest / Romania

43

SIMULATION OF SALINITY STRESS ON GROWTH OF WINTER WHEAT

BY SOIL WATER ATMOSPHERE PLANT MODEL IN LOESS PLATEAU /

SWAP模拟盐分胁迫对黄土高原冬小麦生长的影响

Ph.D. Quan Quan1, 2), Prof. Ph.D. Bing Shen2), Prof. Ph.D. Runxun Jin 3), Ph.D. Changxing Jin4)

1)State Key Laboratory of Hydrology-Water Resources and Hydraulic Engineering, Nanjing Hydraulic Research Institute, Nanjing / China; 2) Xi’an University of Technology, Xi’an / China; 3)Anglia Ruskin University, Cambridge CB1 1PT, Cambridge / United Kingdom ; 4) Environmental Consulting & Technology, inc. Florida / U.S.A.

53

KINEMATIC STUDY OF THRESHING PROCESS CONDUCTED BY TANGENTIAL THRESHING SYSTEM OF CONVENTIONAL CEREAL HARVESTING COMBINES/

STUDIUL CINEMATIC AL PROCESULUI DE TREIER REALIZAT DE APARATUL DE TREIER TANGENŢIAL AL COMBINELOR CONVENTIONALE DE RECOLTAT CEREALE

PhD. Eng. Ivan Gh., PhD. Eng. Vlăduț V.

INMA Bucharest / Romania

59

THEORETICAL ARGUMENTATION ON THE CHOICE OF VALUES FOR THE PARAMETERS OF THE PRESS DESIGNED TO SQUEEZE OUT THE JUICE FROM PLANTS STEMS /

MOTIVAREA TEORETICĂ A ALEGERII VALORILOR PARAMETRILOR PRESEI PENTRU STOARCEREA SUCULUI DIN TULPINILE PLANTELOR

PhD. Eng. Cerempei V.

Institute of Agricultural Machinery "Mecagro", Chisinau / Moldova

69

EXPERIMENTAL ARGUMENTATION OF PRESS PARAMETERS FOR SQUEEZING JUICE

FROM PLANT STEMS /

ARGUMENTAREA EXPERIMENTALĂ A PARAMETRILOR PRESEI PENTRU STOARCEREA SUCULUI DIN TULPINILE PLANTELOR

Assoc.Coresp. Mem. of MSA. PhD. Eng. Hăbăşescu I., PhD.Eng. Cerempei V., Eng. Balaban N.

Institute of Agricultural Machinery „Mecagro”, Chisinau / Moldova

79

 

DEVELOPMENT OF A NEW METHOD FOR VOLUME MEASUREMENT

BASED ON MOIRÉ TECHNIQUES /

DESENVOLVIMENTO DE UM NOVO MÉTODO PARA MEDIDA DE VOLUME

BASEADO EM TÉCNICAS DE MOIRÉ

Ph.D. Stud. Eng. Marcos V. G. Silva1), Prof. Ph.D. Eng. Adilson Enes2),

Prof. Ph.D. Eng. Inácio M. D. Fabbro1), Ph.D. Eng. Celina de Almeida

1) Faculty of Agricultural Engineering, UNICAMP, Campinas, SP / Brazil

2) Department of Agricultural Engineering, UFS, Aracaju, SE / Brazil

87

RESEARCH INTO THE GRADING METHOD OF KIWI FRUIT BASED ON VOLUME ESTIMATION

AND SURFACE DEFECT /

基于体积估计和表面缺陷的猕猴桃分级方法

Prof. Ph.D. Lijia Xu 1), Stud. Yu Feng 1), Stud. Zhangkun Fan 1), Ph.D. Dingchun Yun2)

1) College of Mechanical and Electrical Engineering, Sichuan Agriculture University, Ya’an / China,

2) University of Applied Sciences Upper Austria, Softwarepark 11, Hagenberg / Austria

93

MATHEMATICAL MODEL OF THE PNEUMATIC-SCREW CONVEYOR

MECHANISM OPERATION /

МАТЕМАТИЧНА МОДЕЛЬ ФУНКЦІОНУВАННЯ ШНЕКОВОГО МЕХАНІЗМУ ПНЕВМОШНЕКОВОГО ТРАНСПОРТЕРА

Ph.D. Hevko R.B.1), Ass. Prof. Ph.D. Stud. Dzyura V.O.2), Romanovsky R.M.2)

1)Ternopil National Economical University, Lvivska / Ukraine,

2)Ternopil Ivan Pul'uj National Technical University / Ukraine

103

The Vision system usage as data source for statistical process control in the food extrusion /

Wykorzystanie systemu wizyjnego do statystycznej kontroli przebiegu procesu ekstruzji produktów źywnościowych

PhD. Eng. Żelaziński T., PhD. Eng. Ekielski A., PhD. Stud. Eng. Florczak I.

Warsaw University of Life Sciences, Faculty of Production Engineering,

Department of Production Management and Engineering, Warsaw / Poland

111

MODELING FOR USE OF WATER IN AGRICULTURE /

MODELLAZIONE PER L’USO DELLE ACQUE IN AGRICOLTURA

Prof. Eng. Trulli E.1), Prof. Eng. Ph.D. Torretta V.2), Dr. Eng. Ph.D. Rada E.C.3),

Lect. Eng. Ph.D. Istrate I.A. 4), Prof. Eng. Papa E.A.2)

1)University of Basilicata, Potenza / Italy; 2) University of Insubria/ Italy, 3) University of Trento / Italy,

4) University POLITEHNICA Bucharest / Romania

121

OPTIMIZATION OF THE DOSING PUMP FUNCTIONAL PARAMETERS USED

FOR AGRICULTURAL CROPS FERTIGATION /

OPTIMIZAREA PARAMETRILOR FUNCŢIONALI A POMPEI DE DOZARE UTILIzATĂ

LA FERTiRIGAREA CULTURILOR AGRICOLE

PhD. Eng. Biolan I.1), PhD. Eng. Visan A.L.2), Eng. Vulpe G.1), Eng. Biolan C.1)

1) I.N.C.D.I.F.”ISPIF” Bucharest / Romania; 2) INMA Bucharest / Romania

129

QUADRATIC REGRESSION - BASED ORTHOGONAL DESIGN AND

NUMERICAL SIMULATION OF A NEW-TYPE AGRICULTURAL WELL PUMP /

一种新型农用井泵的二次回归正交设计与数值模拟

Ph.D. Stud. Wang Hongliang 1), Prof. Ph.D. Shi Weidong 1), Ph.D. Stud. Wang Chuan 2)

1) Research Center of Fluid Machinery Engineering and Technology, Zhenjiang / China;

2) Nangyang Technological University, Singapore / Singapore

137

BLADE TYPE CAVITATION PREDICTION ON THE TWICE DEFORMATION

OF AGRICULTURAL AUTOMOBILE ENGINE COOLING WATER PUMPS BASED ON CFD

基于CFD的农用汽车发动机冷却水泵二次变曲率叶型空化特性预测

Lect. Ph.D. Xue Dangqin1, 2), Lect. Ph.D. Ma Shibang3), Lect. Ph.D. Eng. Shi Huojie 4), Prof. Ph.D. Hou Shulin1)

1) College of Engineering ,China Agricultural University, Beijing / China; 2) School of Mechanical Automotive Engineering, Nanyang Institute of Technology, Henan / China;3) Nangyang Normal University, Henan / China;

4)Department of Biological Systems Engineering, Washington State University, Pullman / U.S.A.

147

MOIRÉ SUPPORTED STRESS DISTRIBUTION STUDY ON GEARS /

APLICAÇÃO DA TÉCNICA DE MOIRÉ NO ESTUDO DA DISTRIBUIÇÃO

DE CARGAS EM ENGRENAGENS

BSAE. Stud. Eng Villa D.1), Prof. Ph.D. Eng. Gazzola J.2), Prof. Ph.D. Eng. Dal Fabbro I.M.1),

Ph.D. Stud. Eng. Silva M.V.G. 1),

1)Faculty of Agricultural Engineering, UNICAMP, Campinas, SP / Brazil,

2)Department of Agricultural Engineering, UFS, Aracaju, SE / Brazil

157

 

INVESTIGATING A POWER TILLER HANDLE AND SEAT VIBRATION ON TRANSPORTATION MODE /

بررسی ارتعاش دسته و صندلی تراکتور دو چرخ در حالت حمل و نقل

MSc. Hossein Ahmadian1), Assoc. Prof. Seyed Reza Hassan-Beygi2), Assoc. Prof. Barat Ghobadian 3)

1) Department of Agro-technology, College of Abouraihan, University of Tehran, Tehran / Iran,

2), Dept. Agro-technology, College of Abouraihan, University of Tehran, Tehran / Iran,

3) Department of Mechanics of Agricultural Machinery Engineering, Tarbiat Modaress University, Tehran / Iran

165